1
 
Toyo Proxes TQ
Toyo Proxes TQ
 
16" Sizes
 

FEATURES AND BENEFITS

DRAG RADIAL TREAD COMPOUND

  • Maximizes grip at launch.

DUAL-PURPOSE ASYMMETRIC TREAD DESIGN

  • Optimizes performance for track and street use with two distinct tread areas.

SEMI-SLICK INNER AREA

  • Improves traction on independent rear suspension vehicles, while maintaining consistent grip on straight axle rear suspension vehicles.

VARIABLE PITCH OUTER AREA

  • Reduces pattern noise when on the street.

DRAG-RACE CONSTRUCTION WITH SPECIAL DRAG-RACE RADIAL CARCASS

  • Helps tire maintain a large, consistent contact patch for increased traction throughout a drag run.
255/50R16
P275/45R16 LL
 
17" Sizes
P275/40R17 LL
P315/35R17 LL
P345/40R17 LL
 
18" Sizes
P315/35R18 LL
 
 
 
 
 

Q. How does the Proxes TQ differ from the Proxes Drag Racing Slick?

  • The Proxes TQ may be used legally on public roads. It has a tread pattern designed to work on both the street and at the drag strip, and utilizes a radial construction. The Proxes Drag Slick on the other hand, is NOT street legal, does not have any tread grooves and is of bias-ply construction.
 

Q. What does the "LL" in the size designation mean?

  • "LL" stands for Light Load (LL). Information about LL tires can be found by clicking here.
 

Q. Will performance be affected if I mount the Proxes TQ with the outside sidewall facing in?

  • The Proxes TQ's asymmetric tread pattern was designed to increase the contact patch on the inside shoulder area for vehicles with independent rear suspension. Therefore, mounting the Proxes TQ with the outside sidewall facing inward may decrease performance.
 

Q. What is the recommended inflation pressure for the track for the Proxes TQ?

  • Start with a cold tire inflation pressure of 17 psi. Adjust the tire inflation pressure up or down in one PSI increments to achieve the desired results. Use as much pressure as possible for track conditions without causing the tire to slip. Higher inflation pressures will improve reaction time, stability, and rolling resistance.
 

Q. What is the minimum inflation pressure that I can use on the Proxes TQ on the drag strip?

  • When using the Proxes TQ on the drag strip, always inflate to at least 15 psi. Always remember to re-inflate the tires to the recommended street inflation pressure before leaving the track. Consult your dealer or contact Toyo's consumer relations group for recommendations on inflation pressures for the street.
 

Q. Should I use bead screws with the Proxes TQ?

  • Never use screws to secure the tire to the rim.
 

Q. How long should I do a burn out?

  • As a general guideline, if you have experience racing on drag radial tires, we recommend that you not change your burn-out procedure. However, for the very first run, we recommend a burn-out that is slightly longer than normal. Generally, on a cold track in colder ambient temperatures, we recommend a longer burnout, and conversely, a shorter burn-out under warmer conditions. Beware that long burnouts may overheat the compound and shorten the usage life of the tire.
 

Q. Can I use the bias, non-radial Proxes Free Rolling Drag Tire on the front steer axle and the radial Proxes TQ on the rear?

  • Any combination that includes the Proxes Free Rolling Drag Tire can only be used on the track. The Proxes Free Rolling Drag Tire was not designed in conformance with Federal requirements for street tires, and therefore is NOT street-legal.
 

Q. Can I apply extra traction/tread softening chemicals to the Proxes TQ?

  • NEVER APPLY ANY TYPE OF CHEMICAL TO THE PROXES TQ. Tread softening or any other type of chemical applied to the Proxes TQ may affect its integrity.
    WARNING! FAILURE TO FOLLOW THIS ADVICE MAY RESULT IN CATASTROPHIC FAILURE OF THE TIRE, WHICH COULD LEAD TO LOSS OF VEHICLE CONTROL, AND THE POSSIBILITY OF SERIOUS INJURIES OR DEATH
 

Q. Can I repair a puncture to the Proxes TQ?

  • NEVER REPAIR OR USE A REPAIRED PROXES TQ!
    WARNING! FAILURE TO FOLLOW THIS ADVICE MAY RESULT IN CATASTROPHIC FAILURE OF THE TIRE, WHICH COULD LEAD TO LOSS OF VEHICLE CONTROL, AND THE POSSIBILITY OF SERIOUS INJURIES OR DEATH.
 

WARNING!

As a dual-purpose competition tire, the Proxes TQ is designed with a reduced tread depth and a special tread rubber compound for optimal dry weather traction. Therefore, it is important that you frequently check the available tread depth, because like all competition tires, the Proxes TQ will wear out much sooner and offer less wet weather grip, than regular passenger-car tires. Never use Proxes TQs, or any tires, on the street if they are worn down to the wear indicator bars, i.e., the available tread depth is no more than 2/32nds of an inch. USE EXTREME CAUTION AND REDUCED SPEEDS WHEN DRIVING WITH THE PROXES TQ IN WET CONDITIONS.